Too Hot, Too Bright? How to Reduce Afternoon Sun and Glare in Canberra Homes
Living in Canberra often means strong sun, glare, heat and privacy issues—especially around windows. This guide explains how the right combination of curtains, roller blinds and flyscreens can quietly fix everyday comfort problems and help your home feel better, all year round.

It's a familiar problem in many Canberra homes.
The living room feels perfectly comfortable in the morning. But by mid-afternoon, sunlight starts streaming through the windows, reflections appear on the television, and sitting near the glass becomes less pleasant.
You reach for the blinds, only to discover that closing them makes the entire room too dark.
What if you could reduce afternoon glare without losing the natural light you enjoy?
The answer depends on what's causing the discomfort. Direct sunlight, reflected glare and unwanted heat gain are related, but they are not the same problem—and they don't always require the same solution.
For west-facing windows in particular, the right combination of shading, fabric selection and installation can make a noticeable difference to how a room feels during the afternoon.
This guide explores how to manage strong afternoon sunlight in Canberra homes, whether you're choosing blinds for a living room, dealing with reflections in your home office, or trying to keep a bright apartment comfortable.

Why Is the Afternoon Sun So Difficult to Control?
Not all sunlight enters your home at the same angle.
In Canberra, west-facing windows can receive direct sunlight later in the day, when the sun is lower in the sky.
Unlike overhead sunlight, low-angle afternoon sun can travel further into a room, reaching furniture, television screens, desks and seating areas.
This creates two common problems.
Visual discomfort: Strong sunlight or reflected light makes it difficult to see screens or enjoy a room comfortably.
Unwanted heat gain: Sunlight passing through glass can warm internal surfaces, making the room feel hotter.
These problems can occur together, but their solutions are not identical.
The Australian Government's YourHome shading guide explains why east- and west-facing windows require particular attention. Their exposure to low-angle morning and afternoon sun makes some conventional horizontal shading arrangements less effective.
For Canberra homeowners, understanding when and how sunlight enters a room is often more helpful than simply choosing the darkest available blind.
Is your room suffering from glare, heat or both?
What you notice | Likely issue | What to investigate |
Sunlight shines directly into your eyes | Direct glare | Adjustable blinds or shading that interrupts the sunlight |
Reflections make the television difficult to see | Reflected glare | Sunscreen blinds, adjustable slats and screen positioning |
The room becomes hotter as sunlight hits the windows | Solar heat gain | Suitable solar-control window coverings and external shading |
The room is bright but you don't want to close the curtains | Excessive brightness | Light-filtering fabrics or adjustable blinds |
The room stays hot after direct sunlight disappears | Stored heat or other heat sources | Glazing, building insulation, ventilation and overall shading |
Closing the blinds makes the room too dark | Insufficient flexibility | Adjustable or layered window treatments |
The first step is to identify which of these problems matters most.
West-Facing Windows: The Afternoon Sun Challenge
West-facing windows are particularly relevant when a room receives uncomfortable direct sunlight later in the day.
The problem often becomes most noticeable during warmer months, when strong sunlight coincides with an already warm afternoon.
A large west-facing sliding door, for example, may allow sunlight to fall across the floor and furniture long before the sun sets.
An overhead eave may provide useful protection when the sun is high, yet allow low-angle sunlight to pass beneath it later in the afternoon.
Why simply closing the curtains may not be enough
Heavy curtains or blockout blinds can make the room darker and reduce direct light.
However, if sunlight has already passed through the glazing, some solar heat may still be entering the room.
This means the best solution depends on your priority.
If your main concern is glare, adjustable indoor window coverings may help considerably.
If your room is overheating, you may also need to consider glazing performance, suitable external shading or other building factors.
What about other window directions?
East-facing windows may experience similar low-angle sunlight in the morning.
North-facing windows can receive valuable winter sun, so adjustable seasonal shading may be useful.
South-facing windows generally have different solar exposure in Canberra, although reflected glare can still be a problem.
For a broader comparison of window furnishings by room, see our Blinds Canberra: How to Choose the Right Style for Every Room guide.
How to Reduce Afternoon Glare Without Making the Room Too Dark
Many homeowners assume that strong sunlight calls for completely opaque window coverings.
But if your goal is to keep the living room bright and welcoming, closing a blockout blind all afternoon may not be the best everyday solution.
The key is to choose a product that manages the light according to how you use the room.
Option 1: Sunscreen roller blinds — manage glare while retaining some views
Sunscreen roller blinds are worth considering when you want to soften strong sunlight while maintaining some connection with the outdoors.
Their woven fabric can reduce brightness and glare while allowing varying degrees of outward visibility.
They can be particularly useful for:
Living rooms with large windows
Home offices with computer screens
Open-plan areas that receive afternoon sunlight
Windows overlooking gardens or outdoor spaces
However, not every sunscreen fabric performs in the same way.
Fabric colour, weave and openness influence how much light passes through and how clearly you can see outside.
A fabric that preserves a beautiful view may filter less light than a denser alternative.
Important: Sunscreen blinds generally do not provide dependable night-time privacy when the lights are on inside. If your living room faces the street or neighbouring properties, you may need a second covering.
Option 2: Light-filtering blinds — softer daylight with less direct brightness
Light-filtering or translucent roller blinds diffuse incoming daylight.
Instead of preserving a clear view through the fabric, they generally create a softer, more even appearance.
These can work well when you want daylight but don't need to see outside through the lowered blind.
They may be helpful in living rooms, dining areas and other spaces where a bright but less visually harsh environment is preferred.
Light-filtering fabric is not necessarily blockout fabric. It may still allow considerable brightness through the window.
The amount of privacy also varies by fabric and lighting conditions, so samples should be assessed carefully.
Option 3: Venetian blinds — change the direction of incoming light
Venetian blinds have adjustable horizontal slats that can help redirect incoming sunlight.
Instead of fully blocking the window, you can change the slat angle according to the sun's position.
This can be particularly useful where you want to limit light falling directly onto a desk or screen while still allowing some daylight.
For west-facing windows, the ideal slat angle changes with the sun, so occasional adjustment may be necessary.
No slat position will eliminate every possible reflection, especially where light also enters through nearby windows.
Option 4: Sheer curtains — diffuse brightness and soften the room
Sheer curtains can soften direct sunlight and create a more even quality of light.
They are especially appealing where homeowners want to maintain an open, airy appearance.
However, sheer curtains should not automatically be treated as a complete solution to strong afternoon glare.
Very lightweight fabrics may still allow substantial light through, and their ability to reduce glare varies.
If sunlight continues to fall directly onto a television or computer screen, a more effective light-control layer may be needed.
Which option is best for your problem?
Window treatment | Main advantage | Important limitation |
Sunscreen roller blind | Reduces glare while potentially retaining outside views | Limited night-time privacy; solar control varies |
Translucent roller blind | Softens incoming brightness | Usually obscures the view and still admits light |
Venetian blind | Adjustable light direction | Gaps and slat angles may allow direct light |
Sheer curtain | Softens daylight and adds visual texture | May not sufficiently control intense direct glare |
Blockout blind | Strong reduction in light passing through fabric | Makes the covered area much darker; edge gaps may remain |
Layered system | Different levels of control through the day | Requires additional space, hardware and cost |
Our recommendation: If you want to keep your west-facing living room naturally bright, begin by comparing sunscreen and adjustable options before assuming that blockout fabric is necessary.
What If Your West-Facing Room Is Actually Getting Too Hot?
When excessive heat is the main problem, it's important to consider more than visible brightness.
Sunlight carries energy. When it passes through glass and is absorbed by floors, furniture and other surfaces, that energy can contribute to warming the room.
Internal blinds and curtains can influence how sunlight and heat move through the window area. However, they do not necessarily prevent solar energy from entering the glass in the first place.
The Australian Government's YourHome guidance on glazing explains that appropriate external shading is generally more effective at preventing solar heat gain than relying on internal blinds alone.
Internal shading: Useful for everyday comfort
Internal roller blinds, Venetian blinds and curtains can improve visual comfort and provide flexible light control.
Suitable fabrics and close-fitting window coverings may also contribute to thermal comfort.
However, the actual result depends on factors such as fabric properties, colour, fit, glazing and how the coverings are used.
A blockout blind may substantially reduce visible sunlight without solving every source of heat entering a room.
External shading: An option for significant overheating
Where a west-facing room experiences serious summer overheating, suitable external shading may deserve consideration.
Examples include adjustable external screens, appropriately designed vertical shading and some landscaping or architectural solutions.
Unlike an internal blind, suitable external shading can intercept sunlight before it passes through the glazing.
The right arrangement depends on the building, its orientation and applicable installation requirements.
If overheating is severe, a building designer or qualified energy assessor can help determine whether glazing or external shading improvements are needed in addition to internal window furnishings.
A simple habit that may help
During warmer months, lower suitable blinds before strong direct sunlight begins entering the room, rather than waiting until the room already feels uncomfortable.
This is especially relevant where afternoon sunlight repeatedly falls on large windows.
In winter, when solar warmth is welcome, you may prefer to open suitable coverings during sunny periods and close them later.
For more seasonal advice, see the Australian Government's window efficiency recommendations.
The Home Office Problem: Sunlight Reflecting Off Your Computer Screen
Working from home makes sunlight control particularly important.
You may enjoy a bright home office in the morning but struggle to see your screen as the afternoon sun changes position.
Sometimes the sunlight shines directly into your eyes.
At other times, reflections from windows, glossy desks or bright walls create uncomfortable contrast.
Start by checking your desk position
Before purchasing new blinds, consider whether the desk or screen can be repositioned.
Placing a monitor directly in front of a bright window or with a window immediately behind it can make glare more difficult to manage.
Queensland's WorkSafe guidance on computer visual comfort recommends positioning workstations to reduce reflections and using adjustable window coverings where appropriate.
Which blinds work well for a bright home office?
Sunscreen roller blinds may be useful when you want to retain daylight and some outward visibility.
Venetian blinds may help when you need to adjust the direction of incoming light at different times.
Light-filtering roller blinds may suit rooms where softer, more even daylight is more important than maintaining the view.
The best choice depends on the window position relative to the desk.
For a home office, testing how the fabric behaves during your normal working hours can be particularly valuable.
Large Windows and Sliding Doors: Why Installation Matters
A large west-facing sliding door can make a room feel open and connected to the outdoors.
But the larger the glazed area, the more important it becomes to assess the actual light-control requirements.
The selected system must also allow comfortable access through the door.
Consider the full window opening
Before choosing blinds, check:
The width and height of the glazing
The direction of direct afternoon sunlight
Window and door handles
Available recess depth
Nearby furniture
Required access through sliding doors
Available stacking or mounting space
For roller blinds, fabric width and overall bracket width are not always identical.
This can leave gaps at the edges, which may be particularly noticeable when sunlight enters at a low angle.
A face-mounted installation, revised overlap or another suitable system may help, depending on the window.
Can one large blind cover the entire opening?
That depends on the product's maximum dimensions, fabric specification, support requirements and operating mechanism.
Multiple blinds or another window furnishing system may be more suitable for some wide openings.
For sliding doors, also consider how the covering will operate when people regularly pass through.
These details are worth discussing during measurement rather than discovering after installation.
Should You Combine Sunscreen Blinds with Blockout Curtains?
For some west-facing living rooms, one fabric cannot provide the flexibility needed throughout the day and evening.
A sunscreen blind may make the room more comfortable during sunny afternoons.
However, it may not provide reliable privacy after sunset.
A second, more opaque layer can solve that separate problem.
A practical day-to-night arrangement
Morning: Open the coverings where daylight and warmth are welcome.
Afternoon: Lower the sunscreen blind or adjust the slats to manage direct sunlight and reflections.
Evening: Close a suitable opaque layer where privacy is required.
A dual roller system, suitable combination of blinds and curtains, or another layered arrangement may provide this flexibility.
The correct combination depends on mounting space, aesthetics, door operation and budget.
For more information about opaque curtain options, explore blockout curtains.
Remember: Sheer curtains and sunscreen blinds may provide a sense of daytime privacy, but their night-time performance changes when indoor lighting becomes brighter than the outside environment.
A Five-Minute Afternoon Sun Assessment Before Buying Blinds
You don't need technical equipment to identify some of the most useful information about your windows.
Before arranging a consultation, observe what happens in the room during the hours when it feels uncomfortable.
Step 1: Record when the problem begins
Does direct sunlight start entering the room shortly after lunch, later in the afternoon or close to sunset?
The timing can change throughout the year.
Step 2: Identify where the sunlight lands
Does it reach the television, desk, dining table, sofa or floor?
This helps distinguish a specific glare issue from general brightness.
Step 3: Decide whether the room feels hot or simply too bright
If a room becomes very warm, the solution may require more than light filtering.
Step 4: Think about the view
Would you prefer to see outside through a lowered sunscreen blind, or would a more private, softly lit room be acceptable?
Step 5: Check your evening privacy requirements
If the window faces a neighbouring home or public area, make sure your chosen solution also works after dark.
Take a few photographs
Photograph the window and the sunlight problem during the affected time of day.
Include the surrounding walls, handles and any nearby furniture.
These images can help explain the problem during a window furnishing consultation.
When Is Motorisation Worth Considering?
If the same blinds need adjustment every afternoon, motorisation may be worth exploring.
Some compatible systems can be operated using a remote control or scheduled to move at selected times.
This may be useful where the window is difficult to reach or the home has several coverings that need regular adjustment.
However, automation does not automatically detect the sun or prevent overheating.
Features such as light-responsive control depend on the actual motor, controller, sensors and supported integrations.
Before choosing an automated system, ask which functions are included and whether the chosen blind is compatible.
For a fuller comparison, see our Are Motorised Blinds Worth It? A Practical Guide for Canberra Homes.
What to Ask Before Choosing Blinds for a Sunny Room
When comparing fabrics and installation options, bring the conversation back to your particular window.
Useful questions include:
Which fabric will reduce glare without making this room unnecessarily dark?
Will I still be able to see outside when the blind is lowered?
How will the fabric perform when indoor lights are switched on at night?
Is the window's main problem direct sunlight, overheating or both?
Will light enter around the edges because of the mounting position?
Would adjustable slats or layered coverings provide better control?
Is the system suitable for the size and operation of my window or sliding door?
Would another building-related shading solution be needed for significant overheating?
If possible, inspect fabric samples in the actual room during the time when sunlight is strongest.
A sample that looks subtle in a showroom may behave differently in direct west-facing afternoon sunlight.
Frequently Asked Questions
What are the best blinds for west-facing windows in Canberra?
The best choice depends on whether you are trying to reduce glare, control privacy or manage overheating.
Sunscreen roller blinds and adjustable Venetian blinds can be useful for everyday light control. Blockout blinds may suit situations requiring much stronger darkness. Significant heat gain may also warrant external shading or glazing assessment.
Can sunscreen blinds reduce afternoon glare without blocking the view?
Yes, suitable sunscreen fabrics can help reduce glare while preserving some outward visibility.
However, visibility and glare reduction vary according to the fabric's weave, colour and openness. Compare samples rather than assuming all sunscreen blinds perform identically.
Do blockout blinds stop heat coming through windows?
Blockout blinds can reduce direct sunlight and influence thermal comfort, but they do not automatically prevent all solar heat gain.
Their effectiveness depends on fabric construction, fit, glazing and other conditions. Suitable external shading is generally more effective at intercepting sunlight before it enters the glass.
Why does my living room get so bright in the late afternoon?
A west-facing window may receive strong, low-angle afternoon sunlight, allowing light to travel further into the room.
Reflections from nearby buildings, glazing and interior surfaces can also contribute to uncomfortable brightness.
Are sheer curtains enough for a west-facing living room?
They may be useful for diffusing sunlight and maintaining a soft appearance.
However, lightweight sheer fabrics might not sufficiently control intense direct glare or unwanted heat. Some rooms need a denser blind or additional shading.
Do sunscreen blinds provide privacy at night?
Not reliably. When a room is brightly lit inside and darker outside, visibility through many sunscreen fabrics increases.
For dependable night-time privacy, consider a suitable opaque blind or curtain layer.
Can motorised blinds help control afternoon sunlight?
Compatible motorised blinds can simplify adjustment and may offer scheduled operation.
Actual automation features depend on the selected system. Motorisation provides convenience but does not replace appropriate fabric or shading selection.
Enjoy Your Canberra Home Without Fighting the Afternoon Sun
A bright home should feel welcoming, not uncomfortable.
If strong afternoon sunlight makes your living room too hot, creates reflections on your television or leaves you choosing between glare and complete darkness, the right window treatment may help.
The most useful starting point is understanding the problem.
A sunscreen blind may be ideal for maintaining daylight and reducing reflections. Adjustable Venetian blinds may offer more control over incoming light. A layered system can provide additional flexibility when afternoon glare and evening privacy are both important.
And where serious overheating is involved, it is worth considering the bigger picture, including glazing and external shading.
At Sweet Home Blinds, we help customers explore fabrics, operating systems and fitting options based on their windows and daily needs.
Struggling with afternoon sunlight in your living room or home office?
Book a free measure and quote to discuss your window's orientation, the type of glare you're experiencing and the available solutions for your property.
You can also explore our roller blinds collection or read our complete guide to choosing blinds for Canberra homes.
